FREE Shipping all Over India on Orders above ₹999!
SUPERBTECHNOLOGIES
HomeShopHotends, Extruders & NozzlesHotend Mounting & Heating Assembly for Bambu Lab A1 / A1 Mini
Hotend Mounting & Heating Assembly for Bambu Lab A1 / A1 Mini | Superb Tech India
1/5

Hotend Mounting & Heating Assembly for Bambu Lab A1 / A1 Mini

No reviews yet
SKU:S898
Availability:Only 2 left in stock
₹1,449₹1,900-24%
Incl. 18% GST
Quantity:
Key Specifications
Compatibility:Bambu Lab A1 / A1 Mini
Includes:Clip, heater, thermistor
Wiring:Pre-wired, plug-in
Hardware:3 mounting screws
Fixes:Heating and sensor errors
Check Delivery & Serviceability
Same/Next Day DispatchPan India Shipping
100% AuthenticGenuine Part
GST InvoiceTax Credit Claim
Tech SupportProduct Assistance

The Hotend Mounting & Heating Assembly is a replacement for the hotend clip assembly on the Bambu Lab A1 and Bambu Lab A1 Mini. The spring-steel clip holds the hotend in the toolhead and carries the heater and thermistor that press against the heater block, so this one part restores both heating and hotend retention.

When to Replace It

  • Heating errors: The nozzle heats slowly, fails to reach temperature or shows a heating fault.
  • Temperature reading errors: Thermistor faults or unstable nozzle temperatures.
  • Loose hotend: A bent or worn clip no longer holds the hotend firmly, causing calibration and layer problems.
  • Damaged wiring: Pinched or broken leads after a toolhead crash or clog repair.

Key Features

  • All-in-one assembly: Mounting clip, heater and thermistor in one pre-built part.
  • Quick-release clip: Spring-steel latch for tool-free hotend swaps.
  • Pre-wired harness: Plugs straight into the toolhead board, so there is no soldering or crimping.
  • Complete hardware: Three mounting screws included.

Technical Specifications

SpecificationDetails
Compatible PrintersBambu Lab A1, Bambu Lab A1 Mini
Component TypeHotend mounting clip with heater and thermistor
ClipSpring-steel quick-release
ConnectorToolhead board connector, pre-wired
Fasteners3x mounting screws
HSN Code84779000
Country of OriginChina

What's in the Box?

  • 1x Hotend mounting & heating assembly with pre-wired harness
  • 3x Mounting screws

Installation Notes

  1. Power off and unplug the printer, and let the hotend cool fully.
  2. Remove the hotend and the toolhead front cover, then photograph the original wiring before unplugging anything.
  3. Unplug the old assembly from the toolhead board, unscrew it and fit the new one with the supplied screws.
  4. Route the harness along the original path, plug it in, refit the cover and hotend, then run a full calibration.

For step-by-step photos, follow Bambu Lab's official A1 / A1 Mini hotend heating assembly replacement guide.

Category

Hotends, Extruders & Nozzles

Browse similar products and components in this category.

Browse category
Featured Brands
1/11

More in Hotends, Extruders & Nozzles

Explore additional components & matching variations

View All
Integrated Detachable Nozzle 0.4mm for Creality K2 Plus / Hi (1.75mm) | Superb Tech India
-56%
IN STOCK
Hotends, Extruders & Nozzles

Integrated Detachable Nozzle 0.4mm for Creality K2 Plus / Hi (1.75mm)

No reviews
₹687.00₹1,550.00
Removable Nozzle Hotend 0.6mm for Bambu Lab P2S | Superb Tech India
-50%
IN STOCK
Hotends, Extruders & Nozzles

Removable Nozzle Hotend 0.6mm for Bambu Lab P2S

No reviews
₹950.00₹1,900.00
Silicone Sock Cover for Bambu Lab P2S Hotend | Superb Tech India
-43%
IN STOCK
Hotends, Extruders & Nozzles

Silicone Sock Cover for Bambu Lab P2S Hotend

No reviews
₹199.00₹350.00
Hotend Kit with Detachable Stainless Steel Nozzle 0.8mm for Bambu Lab A1 / A1 Mini | Superb Tech India
-21%
IN STOCK
Hotends, Extruders & Nozzles

Hotend Kit with Detachable Stainless Steel Nozzle 0.8mm for Bambu Lab A1 / A1 Mini

No reviews
₹749.00₹950.00
Hotend Kit with Detachable Stainless Steel Nozzle 0.2mm for Bambu Lab A1 / A1 Mini | Superb Tech India
-21%
IN STOCK
Hotends, Extruders & Nozzles

Hotend Kit with Detachable Stainless Steel Nozzle 0.2mm for Bambu Lab A1 / A1 Mini

No reviews
₹749.00₹950.00
H2D High Flow 0.4mm Hardened Steel Hotend with Red Heatsink for Bambu Lab A1 and A1 Mini | Superb Tech India
-32%
IN STOCK
Hotends, Extruders & Nozzles

H2D High Flow One-piece Hardened Steel Hotend 0.4mm for Bambu Lab A1 & A1 Mini

No reviews
₹1,899.00₹2,799.00