FREE Shipping all Over India on Orders above ₹999!
SUPERBTECHNOLOGIES
HomeShopHotends, Extruders & NozzlesHotend Kit with Detachable Stainless Steel Nozzle 0.2mm for Bambu Lab A1 / A1 Mini
Hotend Kit with Detachable Stainless Steel Nozzle 0.2mm for Bambu Lab A1 / A1 Mini | Superb Tech India
1/5

Hotend Kit with Detachable Stainless Steel Nozzle 0.2mm for Bambu Lab A1 / A1 Mini

No reviews yet
SKU:S895
Availability:Only 5 left in stock
₹749₹950-21%
Incl. 18% GST
Quantity:
Key Specifications
Compatibility:Bambu Lab A1 / A1 Mini
Nozzle:0.2mm stainless steel, detachable
Filament:1.75mm
Best For:Fine detail and miniatures
In the Box:Hotend, wrench, spanner
Check Delivery & Serviceability
Same/Next Day DispatchPan India Shipping
100% AuthenticGenuine Part
GST InvoiceTax Credit Claim
Tech SupportProduct Assistance

The Hotend Kit with Detachable Stainless Steel Nozzle 0.2mm is a complete drop-in hotend for the Bambu Lab A1 and Bambu Lab A1 Mini. It comes fully assembled with heatsink, heater block, silicone cover and a pre-installed 0.2mm nozzle, so you can turn your A1 into a fine-detail printer in a couple of minutes.

Why a Detachable Nozzle?

On the stock A1 hotend, the nozzle and heatbreak are one piece. When the tip wears or clogs, the whole hotend goes in the bin. This kit uses a threaded nozzle that unscrews from the heatbreak, so a worn or blocked tip can be replaced on its own while the heatsink and heater block stay in use.

What a 0.2mm Nozzle Is Good For

  • Fine detail: Sharp edges, small embossed or engraved text and crisp features on tabletop miniatures and figurines.
  • Thin walls and small parts: Precision clips, gears, jewellery and model-making parts that a 0.4mm nozzle cannot resolve.
  • Smooth surfaces: Supports layer heights down to about 0.06mm for nearly invisible layer lines.

Expect slower prints than with a 0.4mm nozzle. Use well-dried, clean filament; a 0.2mm orifice is less tolerant of dust and moisture.

Key Features

  • Complete plug-in assembly: Heatsink, heater block, silicone cover and nozzle arrive pre-assembled.
  • Stainless steel nozzle: Clean, corrosion-resistant nozzle for everyday non-abrasive filaments.
  • Finned aluminium heatsink: Keeps the cold zone cool to help prevent heat creep and jams.
  • Silicone cover fitted: Holds heat in the block and keeps filament from sticking to it.
  • Tool-friendly maintenance: Wrench and flat spanner included for nozzle changes.

Technical Specifications

SpecificationDetails
Compatible PrintersBambu Lab A1, Bambu Lab A1 Mini
Nozzle Diameter0.2 mm
Nozzle MaterialStainless Steel
Nozzle SystemDetachable threaded nozzle
Filament Diameter1.75 mm
Recommended FilamentsPLA, PETG
Net Weight31 g
HSN Code84779000
Country of OriginChina

What's in the Box?

  • 1x Hotend assembly for Bambu Lab A1 / A1 Mini (heatsink, heater block, silicone cover)
  • 1x 0.2mm stainless steel nozzle (pre-installed)
  • 1x Nozzle wrench
  • 1x Flat spanner

Installation Guide

  1. Power off the printer and let the hotend cool below 40°C.
  2. Open the hotend latch on the A1 / A1 Mini toolhead and slide out the old hotend.
  3. Slide in the new hotend until it seats fully and close the latch.
  4. On the printer, set the nozzle diameter to 0.2mm, and select the 0.2mm nozzle profile in Bambu Studio.
  5. Run auto-calibration before the first print.
Category

Hotends, Extruders & Nozzles

Browse similar products and components in this category.

Browse category
Featured Brands
1/11

More in Hotends, Extruders & Nozzles

Explore additional components & matching variations

View All
Integrated Detachable Nozzle 0.4mm for Creality K2 Plus / Hi (1.75mm) | Superb Tech India
-56%
IN STOCK
Hotends, Extruders & Nozzles

Integrated Detachable Nozzle 0.4mm for Creality K2 Plus / Hi (1.75mm)

No reviews
₹687.00₹1,550.00
Removable Nozzle Hotend 0.6mm for Bambu Lab P2S | Superb Tech India
-50%
IN STOCK
Hotends, Extruders & Nozzles

Removable Nozzle Hotend 0.6mm for Bambu Lab P2S

No reviews
₹950.00₹1,900.00
Hotend Mounting & Heating Assembly for Bambu Lab A1 / A1 Mini | Superb Tech India
-24%
IN STOCK
Hotends, Extruders & Nozzles

Hotend Mounting & Heating Assembly for Bambu Lab A1 / A1 Mini

No reviews
₹1,449.00₹1,900.00
Silicone Sock Cover for Bambu Lab P2S Hotend | Superb Tech India
-43%
IN STOCK
Hotends, Extruders & Nozzles

Silicone Sock Cover for Bambu Lab P2S Hotend

No reviews
₹199.00₹350.00
Hotend Kit with Detachable Stainless Steel Nozzle 0.8mm for Bambu Lab A1 / A1 Mini | Superb Tech India
-21%
IN STOCK
Hotends, Extruders & Nozzles

Hotend Kit with Detachable Stainless Steel Nozzle 0.8mm for Bambu Lab A1 / A1 Mini

No reviews
₹749.00₹950.00
H2D High Flow 0.4mm Hardened Steel Hotend with Red Heatsink for Bambu Lab A1 and A1 Mini | Superb Tech India
-32%
IN STOCK
Hotends, Extruders & Nozzles

H2D High Flow One-piece Hardened Steel Hotend 0.4mm for Bambu Lab A1 & A1 Mini

No reviews
₹1,899.00₹2,799.00