Frosted Sheet Sticker 220x220x0.6mm for 3D Printer Heated Bed

Description:

220 x 220 x 0.6mm Frosted Heated Bed Sticker Build Plate Tape With Adhesive Back For 3D Printer

 

Direction For Use:

Step 1: Clean the Build Surface

Step 2: remove the adhesive tape on the back of the sheet partially from one side

Step 3: Gently apply the glued sheet from the front, while peeling the adhesive tape backwards

 

Features :

1. Suitable for PLA, ABS, HIPS, PETG, TPE filament, nylon, PC material. Can be used with any 3d printer with aluminium build plate of size 220x220mm
2. Provides extra adhesive force between filament and heating bed.
3. Effectively prevents deformation of ABS, PETG filament.
4. Simple design, fast installation.
5. Dull polish treated surface, reusable 3D printer accessory.
6. Installs much easier than masking tape or films typically used and with fewer chances of air bubbles
7. Protects build plate
8. Heat resistant and durable can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface
9. Creates an optimal bond between the 3D printed object and build a surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface

 

NOTE: 

some filament materials such as PETG have extra bonding when used on this sheet. make sure first layer is properly calibrated and ssmall amount of Z offset is allowed, so that the part can be removed easily after printed.

 

 

Package Includes:

1 x Frosted Sheet Sticker for 3D Printer Heated Bed 220x220x0.6mm